CADX Services, Inc. Logo

CADX Services, Inc.

10 Year Seal

Design Services

CADX Services will provide you with the design capabilities to implement often difficult physical layout requirements like impedance matching and application specific form factors. We have implemented principles of controlled impedance and other cutting-edge practices for multiple Sample board customers that are essential for high-speed computations faster than 100 MHz to significantly reduce signal degradation and other design considerations. We have also applied alternative printed circuit board materials like flex circuit technology to minimize often restrictive features of traditional rigid board technology to enable PCBs to be repositioned during installation, maintenance and operation. This has enabled our customers to significant savings both in terms of cost and physical design space and has provided more lightweight designs resistant to shock and vibration.


Printed Circuit Design

Altium:

Altium Designer Summer 08 - Version 17
PCAD 2000 - 2006
PCAD Master Designer 2.0-8.7

Cadence:

OrCAD Layout

Mentor Graphics:

PADS Layout 2005
PADS PowerPCB 3.5 - 9.3.1
Expedition PCB
PADS Perform
PADS 2000

Protel:

Protel 2004

PCB Design Conversion

OrCAD Layout 16.3
PADS PowerPCB 5.0.1-9.3.1
Altium Designer Summer 08 - Version 17
PCAD 2000-2006
PCAD Master Designer 2.0-8.7
Protel
EDA PCB
Tango

Hand Routing

Altium:

Altium Designer Summer 08 - Version 17
PCAD 2000 - 2006

Cadence:

OrCAD Layout

Mentor Graphics:

PADS PowerPCB 3.5 - 9.3.1

Auto Routers

Cadence:

SpeCCTra AutoRouter

Mentor Graphics:

Blazerouter

Altium:

Situs Autorouter

Gerber Editing

CAM350, by Downstream Technologies
CAMtastic, by Altium

Mechanical Design

Alibre Design
Pro Engineer
Solid Works
Inventor

Schematic Capture

Altium:

Altium Designer Summer 08 - Version 17
PCAD 2000 - 2006
PCAD Master Designer 2.0-8.7

Cadence:

OrCAD Capture 9-16.3

Mentor Graphics:

PADS Capture 2005
PADS PowerLogic 3.5 - 9.3.1
DxDesigner

Protel:

Protel 2004
Protel 99

Schematic Conversion

OrCAD Capture 9-16.3
PADS PowerLogic 5.0.1-9.3.1
DxDesigner
WorkView Office
Altium Designer Summer 08 - Version 17
PCAD 2000-2006
PCAD Master Designer 2.0-8.7
Protel
EDA Schematic
Tango


Additional Services

Altium conversion

PCAD conversion

PADS conversion

Netlist conversion

Design Standards
  • IPC-D-325A Generic Standard on Printed Board Design
  • IPC-D-326 Information Requirements for Manufacturing Printed Board Assemblies
  • IPC-D-356B Bare Board Electrical Test Information in Digital Form
  • IPC-SM-782A Surface mount and land pattern standard
  • IPC-2221 Generic Standard on Printed Board Design
  • IPC-2222 Sectional Design Standard for Rigid Organic Printed Boards
  • IPC-2223 Sectional Design Standard for Flexible Printed Boards
  • IPC-2224 Sectional Standard for Design of PWBs for PC Cards
  • IPC-2225 Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies
  • IPC-2615 Printed Board Dimensions and Tolerances
  • Drawing Requirements Manual - Complies with MIL-T-31000 and MIL-STD-100

Design Technologies

Embedded Controllers
GPS Equipment
Digital Signal Processing Boards: AMD SHARC & TI
PICMG's CompactPCI
PICMG's AdvancedTCA
PCMCIA Ver 2.1
PCI 32 Bit universal
PCI 64 Bit (VME)
PC104, ISA
RF 200 Mhz to 60 GHZ Satellite
Analog Power Supplies "switchers 10-600W"
USB 1.0 1M Bit
USB 1.1 11M Bit
USB 2.0 480M Bit
IEEE1394 Firewire T1,T2,T4 & iLINK
IEEE 802.3z Gigabit Ethernet
IEEE 803.11 FAST 11 MBPS
IEEE 802.3U DSL MODEM
Motherboards: AMD & Intel
Chipsets: Winbond, ESS, VIA, Intel, Chips & Tech., Trident, Lucent

Design Disciplines

Professional Video matrix Switch Arrays
Professional Video Distribution System
Professional Audio Distribution System
Tactical Military equipment
Tactical Avionic equipment
Aerospace Technologies
Consumer Electronics
Industrial Electronics
DSP High Speed SHARC AND TI-DSP
FLAT Panel Display Controller