CADX Services, Inc.
(585) 624-1491

1 Oz. Plating, External Conductors
Width	10° C	20° C	30° C	45° C
.005°	633 mA	852 mA	1.014 A	1.206 A
.010°	1.01 A	1.359 A	1.616 A	1.923 A
.015°	1.327 A	1.785 A	2.123 A	2.526 A
.020°	1.61 A	2.167 A	2.577 A	3.066 A
.025°	1.871 A	2.518 A	2.995 A	3.563 A
.050°	2.984 A	4.015 A	4.776 A	5.681 A
.100°	4.758 A	6.402 A	7.615 A	9.059 A
.150°	6.252 A	8.411 A	10.006 A	11.902 A

1 Oz. Plating, Internal Conductors
Width	10° C	20° C	30° C	45° C
.005°	217 mA	225 mA	395 mA	493 mA
.010°	361 mA	527 mA	657 mA	820 mA
.015°	486 mA	710 mA	885 mA	1.104 A
.020°	601 mA	877 mA	1.094 A	1.364 A
.025°	708 mA	1.033 A	1.289 A	1.607 A
.050°	1.178 A	1.719 A	2.145 A	2.675 A
.100°	1.961 A	2.861 A	3.569 A	4.453 A
.150°	2.641 A	3.855 A	4.808 A	5.998 A

Calculated using the PCBTEMP calculator by UltraCAD Design, Inc.

Two formulas were used in the calculation of these numbers:
 
External, as per IPC-D-275
 I = 0.0647(DT^.4281) * ((W * Th)^0.6732)

Internal, as per IPC-D-275
 I = 0.0150(DT^.5453) * ((W * Th)^0.7349)